- Brand CASE
- Model 1650L
- Power 116 kW(156 hP.)
- Number of cylinders 6
- Fuel injection type Direct, Common rail
- Fuel filter С сеткой, навинчиваемый[:en]With mesh, screw-on
- Cooling Liquid
- High idle (no load) 2200 +/- 50 rpm
- Nominal stroke (full load) 2200 rpm
- Low idle 800 +/- 25 rpm
- Useful power 144 h.p. (107 kW) at 2200 rpm
- Full power 156 h.p. (116 kW) at 2200 rpm
- Engine lubrication Forced with a piston cooling system for oil nozzles
- Transverse working angles of the pump 45°
- Longitudinal working angles of the pump 45°
- Radiator cooling area 0.61 m²
- Number of tube rows 4
- Fan diameter 660 mm
- Fan drive Mechanical, belt
- Type Heat exchanger
- Area 0.54 m²
- Generator 65 A
- Batteries (2) 2 x 12 V series, maintenance-free, 750 A CCA at -18° C
- Type Hydrostatic, bidirectional
- Pump Axial piston variable volume
- Motor Axial piston angular variable volume
- Maximum pulling force 275 kN
- Transmission One control arm with electronic straight-line tracking
- Oil filter 4 micron, replaceable, screw-on
- Forward speed 0 - 9.7 km/h
- Reverse speed 0 - 9.7 km/h
- Parking brake SAHR (Spring applied, hydraulically released)
- Steering brakes Hydrostatic
- Final reducer 2 helical gears and planetary reducer
- Gear ratio 61.4:1
- Hydraulic system 132 l/min,207 bar
- Pump productivity at 2200 rpm 132 l/min
- Maximum pressure 207 bar
- Number of lift cylinders for full-turn blade PAT 2
- Channel diameter/stem diameter/stroke 88.9/50.8/826 mm
- Number of turn cylinders for full-turn blade PAT 2
- Channel diameter/stem diameter/stroke 101.6/50.8/508 mm
- Number of swash cylinders for full-turn blade PAT 1
- Channel diameter/stem diameter/stroke 127/63.5/135 mm
- Reference area 34 093 см²
- Service weight 17 960 kg
- Tow bar 66 kg
- Ripper 1600 kg
- Roller protection 242.2 kg
- Adjustable blade tilt 55° - 60°
- Lifting speed 483 mm/sec
- Cutting edge Replaceable, reversible
- Dimensions (Width / Length / Thickness) 200 / 2352 / 20 mm
- Chain tensioning method Grease injection
- Frame Two-piece chassis made of bar steel
- Track link pitch 190 mm
- Track shoe height 56 mm
- Finger diameter 38.5 mm
- Sleeve diameter 65 mm
- Track links per side 45
- Track rollers per side 8
- Carrier rollers per side 2
- Roller diameter 203 mm
BULLDOZER CASE 1650L
БУЛЬДОЗЕР CASE 1650L from exclusive representative in Ukraine!
Similar technique
News
All news
From October 17 to 19, ALEANDA took part in the international specialized exhibition CommunTech2023, which took place in Kyiv. Our company presented four types of equipment at the exhibition: – CASE 695 SV backhoe loader; – CASE CX 35 D mini excavator; – CASE SV 300 B mini loader; – MAGNI TH 4.4.15 telescopic loader; […]
ALEANDA took part in the supply of attachments for CASE 570ST backhoe loaders. Each unit of equipment was equipped with a quick-release bucket, a snow blade, a digging bucket (40 cm) and pallet forks, which will ensure their versatility and high performance. In total, 220 units of high-quality attachments were manufactured and delivered, which was […]
The USAID GOVERLA Project is part of the support for the restoration of communities destroyed by Russian aggression. The donated equipment will ensure the continuous provision of basic municipal services (water supply and sewerage, heating, street lighting and maintenance of roads, public places and cemeteries) and appropriate winter maintenance. Thanks to CASE backhoe loaders, local […]
Contact us
Or leave a request and we will call you within a few minutes
Request a call